metallographic microscope
英
美
金相显微镜
双语例句
- Optical metallographic microscope, micro-hardness tester, electron microprobe and X-ray diffraction analysis were applied to explore the process of intermediate temperature tempering transformation.
利用光学金相显微镜、显微硬度计、电子探针及X射线衍射分析仪初步探索其中温回火转变过程。 - Cracking of H13 steel die blank for fan impellers was analyzed by means of SEM, EDS and metallographic microscope.
通过电镜、能谱分析、金相分析等手段对H13钢制风机叶轮模坯开裂进行了综合分析。 - The fracture of a steel rail was analyzed by means of metallographic microscope, SEM and EDS.
用金相显微镜、描电镜、谱仪分析了钢轨断裂原因。 - The effect of heat treatment on sulfide transformation in the high sulfide steel was investigated by metallographic microscope, SEM and EDS.
研究淬回火热处理工艺对高硫钢的基体组织和硫化物形态的影响，分析了其力学性能和磨损性能。 - The company also owns hardness, metallographic microscope, the mechanical properties of aircraft, non-destructive flaw detection equipment.
公司还拥有硬度计、金相显微镜、力学性能实验机，无损探伤等设备。 - By means of metallographic microscope examination iron powder particles morphology.
用金相显微镜检查铁粉颗粒的形态。 - The mechanisms were analyzed and discussed by metallographic observation and transmission microscope observation of the microstructure.
结合金相组织和透射电镜组织观察，对影响机理进行了分析和讨论。 - In this paper the structure and forming mechanism of reaction layer of TiAl/ B-Ag72Cu/ 42CrMo joint of vacuum diffusion brazing at 870 ℃ were studied by metallographic microscope, scanning electron microscope, electron probe.
使用真空扩散钎焊方法对870℃下TiAl/B-Ag72Cu/42CrMo进行了连接，利用金相显微镜、扫描电镜、电子探针成分线分析及成分定量分析等方法研究了TiAl/B-Ag72Cu/42CrMo扩散钎焊接头组织及接头反应层的形成机理。 - Devices and equipments such as optical microscope, metallographic microscope, scanning electron microscope ( SEM), X-ray diffractometer, microhardness tester, wear tester and so on, were used to observe the structure of boride layer and test properties of boride layer.
用光学显微镜、金相显微镜、扫描电镜（SEM）、X射线衍射仪、显微硬度计、磨损试验机等仪器和设备来观察渗层的组织和测试渗层的性能。 - Macro examination, metallographic microscope, microhardness tester and X ray diffractometer were utilized to study the failure reasons for connecting rode bearing bush of automobile engine.
采用宏微观检验、显微硬度测定、X射线衍射等方法对汽车发动机连杆轴瓦的失效进行了分析。 - Image analysis was carried out by metallographic and scanning tunnel microscopic microscope.
同时进行了纳米块状材料的显微硬度分析、金相分析及扫描隧道显微镜图像分析。 - The accident of LPG spherical tank cracking is introduced. The causes leading to the accident are discussed according to fracture analysis, metallographic examination, electron microscope analysis, spectrometry analysis and corrosion product analysis, and some preventive measures are pro-posed.
介绍了LPG球罐破裂事故，通过断口分析、金相检验、电镜和能谱分析，腐蚀产物分析，探讨了球罐破裂的原因，并提出相应的预防措施和建议。 - The microstructure of rods sintered in vacuum and by sinter-HIP was investigated by metallographic microscope, SEM and TEM.
用会相显微镜、SEM和TEM观察了真空烧结、低压烧结试样的显微结构。 - The phase equilibrium relationship and conjugate phase of equilibrium composition in Ag-Ti system were determined by means of the metallographic microscope and the electron probe microanalysis.
通过金相观察和电子探针微区分析，对退火处理后的试样进行相分析和成分测定，从而获得了相应温度下的Ag-Ti二元体系的相平衡关系和共轭平衡成分。 - The effect of heat treatment on electrical conductivity of Cu based multi-component alloy was studied by metallographic microscope, TEM, SEM/ EDS, XRD and conductance instrument.
借助金相显微镜、TEM、SEM/EDS、XRD及电导仪研究了热处理对铜基多元合金导电性能的影响。 - Delamination defects of 2D-C/ C composites are characterized through metallographic microscope.
采用金相显微镜表征了2D-C/C的分层缺陷。 - It is systematically analyzed the reason of brittle fracture taking placed at the 20 steel high pressure piping used in the ammonia synthesis system by the methods of micro analyses of metallographic microscope and transmission electron microscope, mechanical property experiments and finite element analysis etc.
采用金相显微镜和透射电镜显微分析、力学性能试验与有限元分析等方法，系统分析合成氨系统使用的20钢高压管发生脆断的原因。 - The influence of brazing temperature and cladding ratio of filler metals on brazing quality of aluminum oil cooler for automobile engine was researched. The brazing weld microstructure was analyzed by optical metallographic microscope.
研究了汽车发动机铝油冷器钎焊温度和钎料包覆率对钎焊质量的影响，借助金相显微镜对钎缝组织进行了分析。 - By means of chemical analysis, mechanical test, metallographic microscope, energy spectrometer and SEM, Failure analysis for Ω-type corrugated pipe of heat supply pipeline was carried out.
通过化学分析、力学试验、金相显微镜、离子光谱仪、能普仪及扫描电镜等测试手段对输热管道Ω型波纹管开裂溢漏进行了失效分析。 - The microstructure and component analysis of alloy and composites were investigated by utilizing metallographic microscope, SEM, TEM and XRD; moreover, the mechanical properties of composites were tested by tensile test at room temperature.
利用金相显微镜、SEM、TEM和XRD对合金及复合材料进行微观组织观察及成分分析，并测试了复合材料的室温拉伸性能。 - The effect of thermal treatment and rolling process on Mg-Al-Pb-Zn-Mn alloy discharge performance was studied. According to test results of metallographic microscope and XRD, the changes in microstructure of the reasons for discharge performance of alloy is discussed.
对Mg-Al-Pb-Zn-Mn合金进行了均匀化和轧制处理，研究了均匀化处理和轧制对合金放电性能影响，并根据金相显微镜和XRD测试结果，讨论了微观结构变化对合金放电性能的影响原因。 - Through the mechanical tests, microscope ( stereoscope observation and metallographic microscope) and other methods, trying from construction techniques, technology of stone tools and bone ornaments technology to extract scientific and technical information reflected in these materials.
试图通过力学试验分析、显微镜观察（体视镜观察和金相镜观察）等方法，从建筑技术、石器技术及骨饰技术三个方面对这批材料所反映的科学技术信息进行提取。 - By means of metallographic analysis we used electronic microscope ( X400) to observe the inner structural properties including size, distribution and linkage between crystal particles for the samples from rice varieties under different N application rates.
运用材料金相组织分析方法，采用光学显微镜（放大400倍）观察各品种在不同施氮水平下的稻米组织晶粒的大小、分布与连接状态等内部组织结构。 - The metallographic microscope is used to observe the longitudinal and transverse sections for 11 specimen fins pressed at different pressing times. When the mould wear stage is the excessive wear stage, fin surface burrs increase and the surface roughness becomes larger.
采用金相显微镜，对不同冲压次数时的11组翅片形状的横向和纵向剖面进行观察，在模具过激磨损阶段内，冲压翅片的表面毛刺增多，表面粗糙度增大。 - Then the tissue of Fe-Al intermetallic compound coating was observed by Metallographic Microscope and Scanning Electron Microscope.
采用金相显微镜、扫描电子显微镜（SEM）研究Fe-Al金属间化合物复合涂层的组织。 - Evaluate the mechanical properties of composite coating by micro hardness tester and scratch instrument. Observe the morphologies of composite coatings by optical metallographic microscope and SEM.
用显微硬度计和划痕仪分析复合镀层的力学性能；用光学金相显微镜、扫描电镜观察镀层表面及截面形貌；用X射线衍射仪和能谱仪（EDS）对镀层进行物相和成分分析。